(833) 928-4437
Bring reduced-oxygen culture and high-heat decontamination into one 180L incubator. H3565-180HDO2 adds O₂ control and six divided inner-door compartments; IncuView microscopy remains optional.
Preparing Quote Cart. Your shopping cart stays unchanged.
Optional live-cell imaging for this 180L SureTherm model; check vessel and operating guidance.
Swipe or use the arrows to browse.
BENCHMARK SCIENTIFIC · H3565-180HDO2
Choose the 180L SureTherm HDO2 when your cell-culture protocol calls for reduced oxygen. Adjustable O₂ control, six divided inner-door compartments and a programmed high-heat cycle distinguish it from the standard and HD models.
The family brochure specifies 0.5–20% O₂ and ±0.3% O₂ accuracy. This is the SureTherm model to compare when hypoxia is a protocol requirement.
Six divided inner-door compartments let you access a section instead of opening the entire inner glass door. Plan vessel placement around the compartment openings.
The 125°C hot-air decontamination program takes approximately eight hours including heat-up and cooling. Remove the optional microscope and other heat-sensitive materials first.
Oxygen control is for conditions below atmospheric oxygen. The operating manual describes lowering O₂ using an external nitrogen supply and an appropriate nitrogen regulator—not by supplying oxygen from a cylinder. Plan both CO₂ and nitrogen services, suitable ventilation and a stable installation location. Share your required low-O₂ setpoint when requesting a quote so the configuration can be confirmed for that protocol.
The 180L chamber measures 18.7 × 20.8 × 28 in. / 47.3 × 52.8 × 71 cm (W × D × H). The exterior is 22 × 26.2 × 37.2 in. / 56 × 66.5 × 94.5 cm. Check flask heights, shelf positions, the door-opening area and a stable support surface before ordering.
Compare exterior width before choosing chamber volume. The bars below share a width scale; they are not a drawing of the instrument or its required clearances.
Check depth, height, access and support capacity too. Manufacturer installation instructions call for ventilation space behind the unit; the cabinet footprint is not the complete installation envelope.
Supply CO₂ through an appropriate regulator and follow the manual’s 1 bar (14.5 psi) supply guidance. The gas source and regulator are separate purchases. The unsuffixed H3565-180HDO2 is the US-plug version; do not assume a 230V EU version is supplied.
For reduced-oxygen operation, also arrange a suitable nitrogen supply and nitrogen regulator. The manufacturer manual describes a different adjustable-setpoint interval from the brochure’s published O₂ range; confirm any protocol requiring an endpoint near 0.5% or 20% before ordering.
To view cells inside this incubator, add H3565-180-LCI IncuView integrated microscope shelf. The base incubator does not include the microscope. The imaging system supports still images, video and time-lapse acquisition with compatible clear vessels.
The brochure specifies clear flasks, dishes and plates less than 8 mm thick. Confirm your exact vessel geometry and imaging needs before ordering. Remote viewing requires a Windows computer and suitable network setup; viewing devices are not included.
Remove the microscope shelf before any high-heat decontamination cycle. The heat will damage the microscope.
Compact CO₂ incubation; US or EU cord selection.View H2300-HC2
Smaller direct-heated chamber; two shelves.View H3565-45
Larger chamber for routine CO₂ culture.View H3565-180
Adds a programmed 125°C decontamination cycle.View H3565-180HD
Adds hypoxia control and six inner-door compartments.View H3565-180HDO2
Ordering and delivery: Blue Tiger Scientific supplies this product as a reseller. Contact us before ordering to confirm the configuration, supplier availability and delivery requirements. Any lead time is an estimate rather than a guaranteed arrival date.
Returns and cancellations: Start every return or cancellation request with Blue Tiger Scientific before shipping any item. Eligibility and any applicable charges are subject to our store policies and the supplier authorization for the order. Do not send equipment directly to the manufacturer without instructions.
Manufacturer warranty and technical service: Benchmark Scientific lists a two-year manufacturer warranty for this incubator. Coverage is subject to the manufacturer’s applicable terms; this is separate from return eligibility. Benchmark Scientific provides manufacturer technical service and warranty determinations. Blue Tiger Scientific can coordinate the request and purchase documentation.
Before installation: Follow the model-specific operating manual, electrical requirements and gas-supply instructions. Keep the packaging and report transit damage promptly to Blue Tiger Scientific.
email us here: info@bluetigerscientific.com or live chat
Shipping and taxes calculated at checkout. Your quote list is separate.
Review your items, then tell Blue Tiger Scientific where your order is going. Your shopping cart stays unchanged.
International enquiries are welcome. Pricing, shipping availability, freight and any import requirements are confirmed manually.
Prices shown are for reference. We’ll confirm pricing, availability and shipping in your quote.
For eligible Accucold / Summit equipment. White glove and inside delivery are not included and are quoted separately. Shipping availability and final freight are confirmed with your quote, including Alaska, Hawaii and mixed-product requests.
Optional preferences only. Terms must be confirmed by Blue Tiger Scientific; no payment is collected and no terms are approved by this request.
Loading the security check…
* Required. Contact details and eligible quote-cart items will be submitted to Blue Tiger Scientific for this enquiry. No payment is collected.
Which would you like to open?
Review items for online purchase.
Review items and request a quote.
Your two carts stay separate. Nothing is moved or combined.
