(833) 928-4437
Choose PLUS when your industrial kit needs gaiters over shoes or boots as well as gloves, an apron and a face shield. If you are outfitting a wearer from scratch, start with the items on your site’s PPE list: Cryo-LNG Gloves supplies the glove pair alone; the Cryo-Industrial Safety Kit pairs the gloves with an apron and face shield. This PLUS set adds the matching industrial gaiters.
PLUS already includes an apron and a pair of gaiters. If you need a brown replacement apron, choose 42″ (CI-A42-BR) for a mid-arm kit or 48″ (CI-A48-BR) for an elbow kit. Order the brown industrial gaiters (CPIGR-BR) separately only to replace the included pair.
The brown CPIGR-BR gaiters extend over the top of footwear and the lower leg. They are 16 inches high and adjust from 13 to 19 inches around; they are not boots. The included FSH1001 face shield is the complete shield, not the replacement window.


Measure the dominant hand. Make a fist and measure around the hand just below the knuckles, excluding the thumb. This is circumference, not palm width. For a second measurement, measure from the wrist fold to the middle fingertip.
Example: For a 215 mm hand and a 42-inch apron, choose SKCLMMWP42GR. If that wearer needs the 48-inch apron with elbow gloves, choose SKCLEMWP48GR; the hand size stays Medium/9.
Use limitation: Not intended for immersion in liquid nitrogen or other cryogenic liquids. This four-component set does not replace a workplace assessment of required PPE.
A pair of brown CPIGR-BR industrial gaiters. The regular Cryo-Industrial Safety Kit already includes the Cryo-LNG glove pair, matched apron and FSH1001 shield. Choose PLUS if gaiters belong on the same kit order.
Order SKCLELWP48GR. It includes Large/10 CLELWP elbow gloves and the CI-A48-BR apron. SKCLMLWP42GR is also Large/10, but has CLMLWP mid-arm gloves and the shorter CI-A42-BR apron.
Not within a PLUS kit. All three mid-arm sizes come with the 42-inch apron; all three elbow sizes come with the 48-inch apron. Choose reach and apron length together, then select hand size.
No. The same CPIGR-BR gaiter pair is included from Medium to X-Large. The industrial gaiters are 16 inches high and adjust from 13 to 19 inches in circumference. They fit over footwear; shoes or boots are not included.
Large/10 covers 229–253 mm. For a 240 mm dominant-hand circumference, keep Large in either cuff: SKCLMLWP42GR for mid-arm or SKCLELWP48GR for elbow. Do not increase glove size just to gain cuff length.
No. The PLUS kit runs from Medium/9 to X-Large/11. A size offered for Cryo-LNG Gloves as a standalone pair is not necessarily offered in a kit. Do not substitute an undersized kit.
The set includes the complete FSH1001 face shield with its headgear, not a loose window or headgear spare. Goggles are not listed among the kit contents; confirm any separate eye-protection requirements for your workplace.
No. The Cryo-LNG glove liner is intended for spills and splashes, not immersion in liquid nitrogen or other cryogenic liquids. Select PPE against your workplace hazard assessment rather than treating a kit as a guarantee of coverage.
Use this text to share information about your product.
Use this text to share information about your product.
Use this text to share information about your product.