(833) 928-4437

Starting without gloves, apron or face shield? This regular industrial kit supplies all three under one part number. The brown Cryo-LNG™ gloves have an abrasion-resistant palm and a waterproof liner intended for spills and splashes.
If you already have the apron and shield, choose the Cryo-LNG Gloves pair alone. If you need gaiters over your footwear as well, choose the Cryo-Industrial Safety Kit PLUS, which adds brown CPIGR-BR gaiters. Gaiters are not in this set.
The apron is included. For a brown replacement apron, match the length to your kit: 42″ (CI-A42-BR) for mid-arm gloves or 48″ (CI-A48-BR) for elbow gloves. To add gaiters to a regular kit you already own, order the brown industrial gaiters (CPIGR-BR) separately. The PLUS kit already includes a pair.
Mid-arm: the gloves are 13¾–15¾ inches long and come with the 42-inch brown CI-A42-BR apron. Elbow: the gloves are 17¾–19¾ inches long and come with the 48-inch brown CI-A48-BR apron. These are glove lengths, not hand measurements. Changing hand size does not change the apron.
Make a fist with your dominant hand. Measure around the hand just below the knuckles, excluding the thumb. For length, measure from the wrist fold to the tip of the middle finger. If the measurements point to different sizes, use circumference.
For example, a 215 mm hand circumference and a mid-arm cuff point to SKCLMMWP42, including CLMMWP gloves and the 42-inch apron. For the same hand with elbow reach, choose SKCLEMWP48 and the 48-inch apron.
Use limit: For splashes and cold contact; not intended for immersion in liquid nitrogen or other cryogenic liquids. Match PPE to your workplace assessment.
Already have the gloves and apron? See the FSH1001 complete face shield for the window and adjustable headgear together.
One matched set, not three separately ordered items. For example, SKCLMLWP42 includes a pair of CLMLWP gloves, one CI-A42-BR apron and one complete FSH1001 face shield.
Choose Cryo-LNG Gloves instead if your apron and shield are already in place. For example, CLELWP identifies the elbow-length Large/10 glove pair; SKCLELWP48 identifies the corresponding three-component kit.
Not for the same cuff and hand size. SKCLELWP48 and SKCLELWP48GR both use CLELWP gloves, the CI-A48-BR apron and the FSH1001 face shield. Only the PLUS set adds the brown CPIGR-BR gaiter pair.
No. The 42-inch CI-A42-BR apron is paired with mid-arm gloves. Switch to elbow and the kit includes the 48-inch CI-A48-BR apron, even when the hand size stays the same.
240 mm falls in the 229–253 mm Large/10 range. Choose SKCLMLWP42 for mid-arm gloves with the 42-inch apron, or SKCLELWP48 for elbow gloves with the 48-inch apron.
Not in full. Cryo-LNG Gloves include an XX-Large/12 pair, but Heathrow lists these industrial kits only in Medium/9, Large/10 and X-Large/11. Do not substitute a smaller size to obtain the set.
No. FSH1001 is the complete face shield: a clear pivoting window and adjustable headgear. FSH1001WIN is a replacement window only; it is not a substitute for the complete shield.
No. The liner is intended for spills and splashes; the kit is not intended for immersion in liquid nitrogen or any other liquid cryogen. The listed components do not establish that the set meets every PPE requirement for a task.
Use this text to share information about your product.
Use this text to share information about your product.
Use this text to share information about your product.