(833) 928-4437
Keep a small culture workflow separate while conserving laboratory bench space. Digital temperature and CO₂ adjustment puts everyday settings in easy reach.
BENCHMARK SCIENTIFIC · 20L PERSONAL CO₂ INCUBATOR
The Benchmark myTemp 20L CO₂ incubator gives small culture workflows a dedicated chamber without committing bench space to a larger unit. Choose H2300-HC2 with a US power cord or H2300-HC2-E with an EU power cord; both use a universal 100–240V, 50–60Hz supply.
A dedicated 20L chamber supports sensitive-culture isolation without reserving a larger incubator for a modest vessel load. Check the interior dimensions against your actual flask and bottle arrangement before ordering.
The 13.2 × 14.5-inch footprint suits space-constrained benches and may suit a biological safety cabinet. Confirm cabinet fit, airflow requirements and installation clearances rather than relying on footprint alone.
US-cord H2300-HC2 and EU-cord H2300-HC2-E share the same chamber and controls. Their universal 100–240V, 50–60Hz supply avoids treating the regional cord options as different incubation systems.
For a small number of cultures, a dedicated 20L incubator can be a better fit than leaving a larger chamber underused. Two removable perforated stainless-steel shelves help organize vessels within the 10.3 × 9.3 × 12.8-inch interior. If your workflow needs more vessels, parallel experiments or room to grow, compare 45L and 180L alternatives by usable shelf layout and required controls—not capacity alone.
The myTemp requires an external CO₂ cylinder or laboratory gas line and a compatible regulator purchased separately; Benchmark's H2300-REG is an optional accessory. Set the supply to 1 bar (14.5 psi) and connect it to the CO₂ inlet, not the sample port. Supplied tubing and an in-line gas filter support setup, while the water reservoir provides passive humidity rather than programmable humidity control. Install on a flat, well-ventilated surface with at least 30cm of wall clearance and suitable ventilation for excess CO₂.
The included 12V vehicle adapter supports powered transport, but the myTemp has no stated internal battery. Benchmark states that, once power is disconnected, temperature remains within 10% of the set parameter for up to one hour; if disconnected from the CO₂ supply, CO₂ percentage decreases by approximately 1% per 30 minutes. These are qualified retention claims, not continuous control or a guarantee of culture viability. Empty the water reservoir before moving the unit, or secure it at the chamber bottom if humidity is essential, and maintain ventilation and safe external gas handling.
The rear CO₂ inlet connects to your regulated gas supply. The separate sample port is for an external CO₂ analyzer—not a supply connection. The manual specifies 1 bar (14.5 psi) supply pressure and includes tubing with an inline filter.
Arrange a compatible CO₂ source and regulator separately. Keep the unit ventilated, use a stable level surface and check the manufacturer’s rear-clearance guidance before placing it inside any cabinet.
H2300-HC2 is supplied with a US power cord; H2300-HC2-E is the EU-cord version. The manufacturer lists a universal 100–240V, 50–60Hz power supply. Both configurations have the same 20L chamber and published CO₂ controls. Select the regional cord required for your installation.
Compare exterior width before choosing chamber volume. The bars below share a width scale; they are not a drawing of the instrument or its required clearances.
Check depth, height, access and support capacity too. Manufacturer installation instructions call for ventilation space behind the unit; the cabinet footprint is not the complete installation envelope.
Compact CO₂ incubation; US or EU cord selection.View H2300-HC2
Smaller direct-heated chamber; two shelves.View H3565-45
Larger chamber for routine CO₂ culture.View H3565-180
Adds a programmed 125°C decontamination cycle.View H3565-180HD
Adds hypoxia control and six inner-door compartments.View H3565-180HDO2
Temperature specifications above follow the manufacturer product brochure. The linked operating manual contains different temperature-performance figures; confirm suitability with Blue Tiger Scientific if your protocol depends on a range limit or tight tolerance.
Ordering and delivery: Blue Tiger Scientific supplies this product as a reseller. Contact us before ordering to confirm the configuration, supplier availability and delivery requirements. Any lead time is an estimate rather than a guaranteed arrival date.
Returns and cancellations: Start every return or cancellation request with Blue Tiger Scientific before shipping any item. Eligibility and any applicable charges are subject to our store policies and the supplier authorization for the order. Do not send equipment directly to the manufacturer without instructions.
Manufacturer warranty and technical service: Benchmark Scientific lists a two-year manufacturer warranty for this incubator. Coverage is subject to the manufacturer’s applicable terms; this is separate from return eligibility. Benchmark Scientific provides manufacturer technical service and warranty determinations. Blue Tiger Scientific can coordinate the request and purchase documentation.
Before installation: Follow the model-specific operating manual, electrical requirements and gas-supply instructions. Keep the packaging and report transit damage promptly to Blue Tiger Scientific.
email us here: info@bluetigerscientific.com or live chat
Shipping and taxes calculated at checkout. Your quote list is separate.
Review your items, then tell Blue Tiger Scientific where your order is going. Your shopping cart stays unchanged.
International enquiries are welcome. Pricing, shipping availability, freight and any import requirements are confirmed manually.
Prices shown are for reference. We’ll confirm pricing, availability and shipping in your quote.
For eligible Accucold / Summit equipment. White glove and inside delivery are not included and are quoted separately. Shipping availability and final freight are confirmed with your quote, including Alaska, Hawaii and mixed-product requests.
Optional preferences only. Terms must be confirmed by Blue Tiger Scientific; no payment is collected and no terms are approved by this request.
Loading the security check…
* Required. Contact details and eligible quote-cart items will be submitted to Blue Tiger Scientific for this enquiry. No payment is collected.
Which would you like to open?
Review items for online purchase.
Review items and request a quote.
Your two carts stay separate. Nothing is moved or combined.
