(833) 928-4437
For narrower tubes, the 13 mm model occupies a 4.1 in square. The 16 mm model takes a 5 in square but provides more tube-body clearance. Both have 36 positions; sizing up does not add wells.
Each catalog number specifies eight racks of one size in one color. For four 13 mm stations and four 16 mm stations, one pack of each size supplies both groups with four spare racks of each size.
Molded coordinates identify positions within each rack. Use the flat label area for a rack ID and select different rack colors for workflows that share a bench.

Capacity alone does not establish fit. Measure the outside diameter at the supported section and compare it with the 13 or 16 mm opening; allow clearance for the tube profile.
No. Both diameters give you 36 wells. The larger model changes the opening and the rack footprint, not the position count.
Eight of the selected size and color. For example, HS27501B gives eight blue 13 mm racks, not eight mixed racks.
Two 13 mm racks span 8.2 in before clearance; two 16 mm racks span 10 in. Allow room to grasp and move each rack.
Use the molded coordinates for the tube position and give each rack its own ID on the flat label area.
Each rack is molded as one piece rather than assembled from detachable plates. Heathrow lists the design for use in water baths.
No. This half-size OneRack is fiberglass-reinforced POM. Select by material as well as by well diameter if your procedure specifies a particular rack.
Use this text to share information about your product.
Use this text to share information about your product.
Use this text to share information about your product.