(833) 928-4437
If each bench needs its own rack, count the benches first. A pack of eight 24-well racks lets eight people each keep a separate set of tubes. If one person needs to keep 96 tubes together, one 96-well rack holds the whole set without splitting it across four smaller racks.


Ordering for total capacity? One 24-well pack gives you 192 positions across eight racks (24 × 8). One 96-well pack gives you 384 positions across four racks (96 × 4). Neither total is the number of tubes in a single rack.
Both blue reinforced-nylon racks take 1.5 or 2.0 mL microcentrifuge tubes in 11.1 mm wells. Compare the rack dimensions above with your usable work surface or water bath, leaving room to grasp the end handles. Alphanumeric positions let you note a tube’s location and return to the same well.
Working with larger 15 mL tubes instead? Compare Heathrow coated wire racks for 15 mL tubes rather than choosing a higher well count here.
One pack of catalog 120241 contains eight 24-well racks. One pack of 120243 contains four 96-well racks. The pack size follows the capacity you select; a quantity of one is not a single rack.
Choose 120241 when you want more separate racks. One pack can put a 24-position rack at each of eight benches. Choose 120243 if fewer benches each need room for a larger set of tubes.
Yes. A single 120243 rack provides 96 alphanumeric positions. Four 120241 racks would hold the same number of tubes, but you would need to record the rack as well as the well for each tube.
No. Both are for 1.5 and 2.0 mL microcentrifuge tubes and have 11.1 mm wells. The larger rack adds positions, not a larger opening.
The 24-well rack measures 5.6 × 3.5 × 2 in; the 96-well rack measures 8.3 × 5.2 × 2.1 in (length × width × height). Allow extra space to reach the handles and clearance above the rack for your tubes.
Yes. Both have a stable design for water-bath use. Compare the rack footprint with the usable space inside your bath; its outside dimensions do not tell you whether the rack will fit.
Yes. Both sizes are made of autoclavable reinforced nylon. Check your tubes, caps and contents separately before autoclaving a loaded rack; the rack’s material does not establish their compatibility.
Use the alphanumeric well marking as the tube coordinate and the end handles to move the rack. When several racks are in use, record which rack the coordinate belongs to so that matching positions on different racks remain distinct.
Use this text to share information about your product.
Use this text to share information about your product.
Use this text to share information about your product.