(833) 928-4437
Short touch mixing and an extended supported run ask different things of an operator. This Digital Vortexer makes the distinction explicit: an illuminated display and digital controls let you set the speed and timing, while intermittent touch and continuous modes provide two working patterns. The supplied head accessories help you choose an appropriate support arrangement rather than improvising around a single contact point.
Intermittent touch operation spans 600–3,600 RPM. Continuous operation spans 600–2,600 RPM. Both use 200 RPM increments, but the upper limits are not interchangeable: the headline 3,600 RPM figure is not the continuous-mode maximum. Select the mode first, then select the validated speed for the sample and container.

Three head accessories cover 50 mL, 15 mL and supported microtube formats, including 1.5/2 mL, 0.5 mL and 0.2 mL tubes. The multiple-position head supports mixing at different angles. Match the head to the actual tube and closure. Do not exceed 1,000 RPM with any of the three head accessories fitted.
Set continuous timing up to 50 hours or intermittent timing up to one minute. Establish a suitable method for the sample and follow the tube and instrument limits in the manual.

Choose 120805 for Purple/Grey or 120806 for Blue/Grey. Each includes one Digital Vortexer, a silicone cap, tube-head accessories and a universal AC adapter with four plug options, including North America. Tubes and reagents are not included.
Use the supplied accessories and power equipment on a stable indoor bench. The specified continuous load limit is 250 g. Keep containers secure and follow the operating instructions; do not remove a conical tube’s bottom from its vortex pocket while the instrument is running. Color is an organization preference, not a change in mixing capability.
No. The continuous range is 600–2,600 RPM. The 600–3,600 RPM range applies to intermittent touch operation.
Speed is adjusted in 200 RPM increments within the selected mode’s range. It is not a continuously variable 1 RPM adjustment.
Yes. Three head accessories cover 50 mL, 15 mL and supported microtube formats including 1.5/2 mL, 0.5 mL and 0.2 mL tubes. Check the manual for the correct support arrangement. The maximum setting for all three head accessories is 1,000 RPM, below the instrument’s general mode limits.
The stated continuous timer limit is 50 hours; intermittent timing is up to one minute. Use a validated run time appropriate to the actual sample and container.
They are two colors of the same Digital Vortexer: 120805 is Purple/Grey and 120806 is Blue/Grey.
One Digital Vortexer, its silicone cap, universal AC adapter and included tube-head accessories. Tubes and reagents are not included.
The supplied adapter is rated 100–240 VAC, 50/60 Hz and includes a North America plug option. Use only the supplied adapter and the correct plug arrangement.
Choose this model for numerical speed and timing control with separate touch and continuous ranges. A rotary-dial model may suit a simpler quick-adjust workflow. Validate either choice for the tube, sample and mixing method.
Use this text to share information about your product.
Use this text to share information about your product.
Use this text to share information about your product.