(833) 928-4437

Choose the Safety Kit PLUS for dispensing or transferring liquid cryogens when you need standard waterproof cryogenic gloves and gaiters over your footwear.
The standard PLUS uses Waterproof Cryo-Gloves® with a waterproof liner for spills and splashes. Grip PLUS changes the glove to a grip-palm style for handling small objects; the other three components stay the same for a given cuff.
Not for immersion. Do not immerse the gloves in liquid nitrogen or other liquid cryogens. Choose equipment to match your workplace procedure.
Mid-arm + 42-inch apron (CA42): glove length 13–15½ inches. Elbow + 48-inch apron (CA48): glove length 17–19½ inches. The cuff and apron are paired, not independently selectable. Changing hand size does not change apron length.
Make a fist. Wrap a tape around the hand just below the knuckles, leaving the thumb out. This circumference—not the distance across the palm—is the width used below. Measure length from the wrist crease to the tip of the middle finger. If length and circumference indicate different sizes, use circumference. Order true to size: the glove should shake off in one motion, not fit tightly.
| Glove size (US / EU) | Hand circumference, in (mm) | Hand length, in (mm) |
|---|---|---|
| Small / 8 | 7–8 (178–202) | 6¾ (171) |
| Medium / 9 | 8–9 (203–228) | 7 3/16 (182) |
| Large / 10 | 9–10 (229–253) | 7 9/16 (192) |
| X-Large / 11 | 10–11 (254–278) | 8 1/16 (204) |
Two sizing examples: A wearer with a 215 mm hand circumference who needs mid-arm gloves takes Medium/9, kit SKMAMWP42GR with a 42-inch apron. For a 240 mm hand and elbow reach, choose Large/10, kit SKEBLWP48GR with the 48-inch apron.
The blue CPGR gaiters cover the top of the shoe or boot and the lower leg. Each is 16 inches high with an adjustable 13–19-inch circumference. The shaped toe cap sits over footwear; an upper-leg tab helps with removal. Gaiter size does not change with glove size.
If you already have gaiters, compare the base standard kit without gaiters. See the grip-palm glove kit to compare glove styles without gaiters. If only the footwear covering is needed, see CPGR gaiters.
No. The 48-inch apron comes with elbow gloves. For mid-arm gloves, all four sizes use the 42-inch apron.
No. Quick removal is already accounted for in the sizing. Use the hand-circumference range; an oversized glove can impair dexterity.
No. CPGR is an adjustable universal gaiter worn over footwear. Check the 13–19-inch circumference and 16-inch height rather than matching it to the glove or shoe size.
No. The included FSH1001 is a clear, pivoting face shield with adjustable headgear. Goggles are not one of the four components. Follow your workplace eye-protection procedure.
Use the kit number, such as SKMAMWP42GR. CA42 identifies only the 42-inch apron; CPGR identifies only the gaiters.
No. The waterproof liner is intended for spills and splashes. The gloves must not be immersed in liquid cryogens.
Select elbow rather than increasing the hand size for reach. Mid-arm and elbow kits both come in Small/8 through X-Large/11.
Use this text to share information about your product.
Use this text to share information about your product.
Use this text to share information about your product.