(833) 928-4437
One pop-up rack holds 21 smaller tubes and 12 larger tubes at the same time. Keep the two sizes together instead of moving a sample set between separate racks.

Use the 17 mm wells for 15 mL tubes and the 29 mm wells for 50 mL tubes. Check the tube body diameter against the opening if you use a nonstandard tube.
Allow a 10 × 5.4 in footprint and 2.8 in of height for the open rack, plus clearance for your tubes. When empty, it collapses to 0.8 in high; the footprint stays the same.
One pack puts a rack on each of two benches. If you need blue at receiving and pink at processing, choose one pack of each for four racks total.
Only running 15 mL tubes? A fixed coated-wire rack dedicates every position to that size. Choose the pop-up design when 15 and 50 mL tubes need to stay together.
Compare fixed coated-wire racks for 15 mL tubes
No. Both sizes fit on every rack at the same time. The ordering choice is color, not tube size.
There are 21 positions for 15 mL tubes and 12 for 50 mL tubes: 33 positions when both sections are full.
Across both racks you have 42 positions for 15 mL tubes and 24 for 50 mL tubes. The larger wells do not replace the smaller positions.
Compare your tube body with the 17 mm opening in the 15 mL section or the 29 mm opening in the 50 mL section. Capacity in milliliters alone does not establish the fit of a nonstandard tube.
Shorter. The footprint stays 10 × 5.4 in; the empty rack folds from 2.8 to 0.8 in high for compact, stackable storage.
No. HS24320P is the pink two-pack; HS24320B is the blue two-pack. Both use the same two well sizes and counts.
Record the rack color or your own rack identifier along with the alphanumeric well position. That distinguishes the same position on two different racks.
Use this text to share information about your product.
Use this text to share information about your product.
Use this text to share information about your product.